Hardening principle:
UV reactive oligomer solvent light - curing the transparent film photoinitiator

Features:
Appearance: transparent liquid viscosity; 120 ± 30CPS/25 ℃
Gloss: 85 ゜ more flexion: pass, do not crack (1mm, 180)
Hardening speed :50-80m / min (80w/in / support)
Hardness: H (pencil hardness)

Uses:
Mainly used in high demand on the explosive line of paper on top of the white light use, has good adhesion.

Usage:
⒈ directly into the slot to use, without adding solvents.
⒉ 15 ℃ when the tank temperature should be less heat (30 ℃), to avoid the oil difficult.
⒊ if BSY-361 UV base oil used in conjunction to improve the adhesion and brightness.
⒋ UV Varnish slimy product is poor, so special attention should be on a sticky paste the selection and operation to ensure quality.
⒌ regular cleaning, inspection scraper with steel wheels, to ensure that the scrape, or stack of paper back on the stick will cause the oil stick.
⒍ shutdown can be toluene, ethyl acetate, isopropyl alcohol, ethanol and other solvents to clean the rubber tire.
⒎ individual ink with UV oil chemical reaction, poor adhesion or discoloration, a version of the required special attention.
⒏ UV lamp should be regularly replaced.

Packing:
20Kg / drum, 200Kg / drum.